Skip to content

Shipping from China to Namibia: Walvis Bay, NamRA customs, duty and VAT

Container vessel at Walvis Bay terminal — reference-grounded illustration
Container vessel at Walvis Bay terminal — reference-grounded illustration. Generated from photographic references; not an event photograph.

Shipping from China to Namibia almost always ends at Walvis Bay, the country's main commercial port, on a long Asia to West and Southern Africa loop or after a change of ship at a hub. The Chinese supplier files the export declaration, the consignee's licensed clearing agent files the SAD 500 with the Namibia Revenue Agency (NamRA), and Chinese goods pay the full SACU tariff plus import VAT. We book the sea leg from Dubai and line up the supplier, the carrier and the Namibian agent before the box is loaded.

Shipping from China to Namibia at a glance

ItemDetail
Main Chinese load portsQingdao, Shanghai, Ningbo, Nansha (Guangzhou); other ports by feeder or relay
Main Namibian portWalvis Bay: 13 commercial berths, container terminal opened in 2019 with a 600 m quay and up to 16 m depth
Second portLuderitz, 254 nautical miles south, for the south of Namibia, mining cargo and fishing
Direct loop calling Walvis BayMaersk FEW6: Qingdao, Shanghai, Ningbo, Nansha, Tanjung Pelepas, Singapore, Pointe Noire, Kribi, Luanda, Walvis Bay
China export filingThe consignor or its customs broker, no later than 24 hours before loading
Import declarationSAD 500 on ASYCUDA World, lodged by a clearing agent licensed by NamRA
Time to enter a container28 days from importation for FCL and LCL cargo
DutySACU common external tariff, by HS code; no trade agreement gives Chinese goods a lower rate
Import VAT15% standard rate, on FOB value plus 10% or market value if higher
Our roleOcean booking from Dubai, carrier B/L released through us, coordination with the shipper and the consignee's clearing agent

How we run a China to Walvis Bay booking from Dubai

This is a cross-trade lane: the goods load in China, discharge in Namibia and never touch the UAE unless you ask. Our Dubai desk buys the space, chooses the loop and follows the box. It suits Namibian importers who already ship with us from the Gulf, and Dubai traders selling Chinese goods into Namibia.

TaskWho handles it
Carrier, loop and space on the vesselAnil Darya, from Dubai
Factory pickup, container stuffing, China export declarationThe supplier or its origin agent, coordinated with us
Bill of ladingThe shipping line's own B/L, released to you through us as the line's agent
Written clearing instruction, SAD 500 and release at Walvis BayThe consignee and its NamRA-licensed clearing agent
Duty, VAT and port charges in NamibiaPaid by the consignee or its clearing agent
Dubai customs clearance, only if the cargo is routed through the UAEAnil Darya, for a fee

The bill of lading you receive is the carrier's document, not ours. We work as agent for many shipping lines, so when a Nansha or Ningbo box sails for Walvis Bay, the line issues its B/L and our office hands it to you, as originals or as a release the line accepts. There is no forwarder's house bill in the chain on this lane.

We do not clear goods in Namibia. Before we confirm space, we ask the buyer for the name of its clearing agent in Walvis Bay or Windhoek and check three things with that agent: that the importer can sign NamRA's written clearing instruction, that any permit for the goods is in hand, and that the tariff headings on the Chinese invoice are the ones it plans to declare. If any answer is missing, the booking waits. A container that lands at Walvis Bay with nobody ready to lodge the SAD 500 runs up storage and line detention for days.

Which Chinese port and which Namibian port?

Load ports in China

Pick the port nearest the factory with a loop or relay to Walvis Bay.

Supplier regionUsual load portWalvis Bay notes
Shandong and north ChinaQingdaoFirst call on Maersk FEW6, so the box rides the whole loop
Shanghai, Jiangsu, ZhejiangShanghai, NingboBoth on FEW6; schedule data also lists MSC's Carioca from Ningbo
Guangdong (Guangzhou, Foshan, Dongguan)NanshaLast Chinese call on FEW6; schedule data shows Nansha as the quickest origin
ShenzhenShekou, YantianAsk whether the box loads direct or moves by barge or relay to a loop port

Walvis Bay or Luderitz

PortBest forWhat the operator says
Walvis BayWindhoek, central and northern Namibia, and transit cargo for Botswana, Zambia, Zimbabwe and the southern DR CongoNamport lists 13 commercial berths, a container terminal commissioned on 24 August 2019 with a 600 m quay and a maximum depth of 16 m, and container capacity of 750,000 TEU a year. Dry and break-bulk capacity is 10 million tonnes a year. Average turnaround for container ships is about 24 to 48 hours.
LuderitzThe south of Namibia and the Northern Cape of South Africa, mining and fishing cargo254 nautical miles south of Walvis Bay, with a 500 m quay, two 60-tonne haulers and a 45-tonne reach stacker. It handles manganese and other mining commodities and fruit exports.

Direct sailings and transhipment from China to Namibia

Two kinds of routing exist: a long loop that carries the box from China to Walvis Bay on one ship, and a relay that moves it to a second vessel at a hub.

ServiceWhat we foundWalvis Bay call
Maersk FEW6Rotation from December 2023: Qingdao, Shanghai, Ningbo, Nansha, Tanjung Pelepas, Singapore, Pointe Noire, Kribi, Luanda, Walvis Bay, Singapore, Qingdao. Maersk dropped Cape Town from this loop to cut transit between the south-west African ports and Asia.Last discharge call, after Luanda
Other direct codesFluent Cargo's schedule data lists direct Nansha and Ningbo to Walvis Bay services under the codes ASAFGR, WAX4, AWA, FEW6 and WAF4, run by CMA CGM, COSCO, Hapag-Lloyd, Maersk and OOCL, and MSC's Carioca with ONE from NingboDirect, several calls on the way
Transhipment optionsThe same data shows relays such as MSC Iroko connecting to Carioca, and COSCO and CMA CGM feeders connecting to the West Africa loopsAfter a change of ship

Why we do not print a transit figure here

Walvis Bay is the last call of the westbound FEW6 timetable, after Pointe Noire, Kribi and Luanda. Maersk's timetable gives day numbers for each call, but the weekdays beside them do not match those numbers, so we leave the figure out rather than risk a wrong one. Forwarder pages quote 20 to 55 days without naming a ship. Ask for the vessel and the Walvis Bay arrival date on every quote.

[AMIR-FACT: which carriers and services we actually book from Qingdao, Shanghai, Ningbo and Nansha to Walvis Bay, whether direct or via a hub (and which hub), and our real port-to-port days on recent bookings]

Walvis Bay as a gateway for inland and neighbouring markets

Walvis Bay also handles cargo for landlocked neighbours. Namport names three main corridors from the port: Trans-Kalahari, Trans-Cunene and Walvis Bay-Ndola-Lubumbashi. The Walvis Bay Corridor Group publishes these road distances and transit times from the port:

DestinationCorridorDistance from Walvis BayPublished transit
Gaborone, BotswanaTrans-Kalahari1,484 km2 to 3 days
Johannesburg, South AfricaTrans-Kalahari1,768 km2 days
Oshikango, northern NamibiaTrans-Cunene1,059 km1 day

The Trans-Kalahari corridor runs about 1,900 km from Walvis Bay through Windhoek and Gaborone to Gauteng, and a railway links the port to Gobabis via Windhoek. For cargo that stays in Namibia, the clearing agent enters it for home use. For cargo moving on to another country, the agent uses a transit procedure: since 5 May 2026, NamRA accepts transit declarations online only and stamps an exit note, which the truck must show at the gate when it leaves the port. Tell us the final country at booking, because it changes the consignee details on the B/L.

Does routing via Dubai help on this lane?

Usually not. A loop from China to Walvis Bay is the shorter path, and adding Jebel Ali puts a second long ocean leg in front of the cargo. Two cases can still justify it.

OptionWhen it fitsWhat changes
Consolidate in DubaiYour Namibian buyer orders Chinese goods and UAE stock in the same monthOne container from Jebel Ali instead of two part-loads from two origins
Hold stock in JAFZAYou sell Chinese goods into several southern African markets and want stock close to handGoods wait in the free zone and leave under a re-export declaration once sold

Our Jebel Ali port guide covers the terminal side, and our article on re-exporting through JAFZA explains the free zone set-up. Where goods are cleared, consolidated or re-exported in Dubai, we handle the Dubai customs clearance for a fee. Routing through Dubai does not change the origin: goods made in China stay Chinese goods for Namibian duty.

[AMIR-FACT: whether we have routed Chinese cargo for Namibia through Jebel Ali (consolidation or JAFZA re-export), the carriers on each leg and when it beat a direct loop to Walvis Bay]

Sea freight from China to Namibia: FCL, LCL and special cargo

ModeGood forPlan for
FCL 20ftSteel, tiles, tyres, heavy spare partsCarrier payload limits and the axle load on the truck to Windhoek or across a border
FCL 40ft and 40ft high cubeElectrical goods, furniture, plastics, solar kits, household goodsCorrect HS codes on every invoice line before stuffing
LCLSamples, first orders, small stock top-upsA consolidation cut-off in China and an unpacking stop at Walvis Bay
Flat rack and open topMining equipment, generators, transformersLashing plan, acceptance at every port on the loop, road permits in Namibia
Breakbulk and project cargoPlant for mines, energy and constructionShip choice, crane capacity at the berth, the road route inland

FCL or LCL from China?

LCL adds a cut-off at the Chinese consolidation warehouse and an unpacking stop at Walvis Bay, and one co-loader's late papers can hold every lot. From about half a container, compare the full-box rate. Our guide to FCL vs LCL costs shows the sums, and our sea freight service sets out what we book.

Machinery and mining equipment

Machinery is the largest group of Chinese goods entering Namibia. A unit that fits a 40ft flat rack can ride a container loop; a larger piece needs a breakbulk sailing, and Namport puts average break-bulk ship turnaround at about 35 to 48 hours. Send drawings, weights and lifting points with your enquiry. Our break bulk and project cargo team plans stowage and lashing.

Excavator secured on a flat rack — generic reference-grounded illustration
Excavator secured on a flat rack — generic reference-grounded illustration. Generated from photographic references; not an event photograph.

Dangerous goods on this route

Lithium batteries, paints, solvents, gas cylinders and mining chemicals are common in Chinese orders and can be dangerous goods.

  • China Customs inspects the packaging used for exported dangerous goods. Carriers ask for the packaging results before they accept the booking.
  • The 2024 edition of the IMDG Code (Amendment 42-24) has been mandatory since 1 January 2026, so the safety data sheet and DG declaration must follow it.
  • FEW6 calls Malaysia, Singapore, the Republic of the Congo, Cameroon and Angola before Walvis Bay. The line checks the class against every port in that rotation, not only the last one.

Our dangerous goods shipping team checks the UN number, class, packing group and carrier acceptance before we confirm space.

The China export side: who files and when

China Customs controls the export. Shanghai's municipal government says the consignor declares once the goods reach a customs supervision area and no later than 24 hours before loading. The consignor, and any broker it uses, needs market entity status, a foreign trade operator registration and a customs record, which can be applied for online through the China International Trade Single Window.

A buyer in Windhoek or a trader in Dubai cannot be the exporter of record in China, so the supplier or its origin agent files. That makes FOB the natural term here: the supplier clears export and loads at the port, and the freight we book starts at the ship's rail. Under EXW you would need a Chinese company willing to export in its own name. Our Incoterms 2020 guide shows where cost and risk pass.

FOB matters twice on this lane. NamRA asks the importer to declare the price charged by the exporter plus every cost of placing the goods on board, and Namibia's import VAT is worked out from the FOB value. Ask the supplier for an invoice that shows the FOB value clearly, separate from any freight it adds.

Does a trade agreement lower the duty on this lane?

No. Namibia applies the tariff of the Southern African Customs Union (SACU), and under Article 31 of the SACU Agreement the members negotiate trade deals with third countries as one bloc. SACU's own list of concluded agreements covers the EFTA states, the EU through the SADC EPA, MERCOSUR, and the United Kingdom with Mozambique. None of them covers China. Chinese goods therefore pay the general rate for their tariff heading.

So a Chinese certificate of origin earns no lower rate, though NamRA lists it as a supporting document and examiners check origin. Routing through Dubai neither helps nor hurts: there is no preference to lose, and storing goods in a free zone does not make them UAE or SACU goods. Inside SACU, trade between members carries no tariff barriers, so goods already cleared in Namibia can move on to South Africa or Botswana without a second customs duty. Confirm with your clearing agent how VAT is handled in that case.

Namibia import customs: NamRA, ASYCUDA World and the SAD 500

The importer and its clearing agent

NamRA's customs procedures manual says every commercial import must be declared on the SAD 500/501, the single administrative document that replaced the older entry forms. In practice a clearing agent lodges it. A clearing agent is a person licensed by the NamRA Commissioner under section 73 of the Customs and Excise Act, 1998, and in NamRA's clearance flow the agent submits the declaration and pays the duty and tax. The importer must give the agent a written clearing instruction on NamRA's standard form, signed by a senior employee or authorised signatory. Declarations without it can be rejected.

Filing, deadlines and pre-filing

The declaration runs on ASYCUDA World. NamRA upgraded the system to version 4.4.1 on 5 May 2026 as part of a move to paperless clearance. The manual sets these time limits from the moment of importation:

CargoTime to make entry
General rule under section 407 days
Loose or break-bulk cargo by sea, air or rail14 days
Containerised cargo, FCL or LCL28 days

Goods not entered in time are sent to the State warehouse. These are legal limits, not free time: terminal storage and line detention start long before day 28. NamRA also allows pre-filed entries once the goods are loaded on the ship bound for Namibia, so the agent can lodge the SAD 500 while the vessel is still at sea. Use that on a voyage this long.

Documents for a Chinese consignment

DocumentComes fromWhat NamRA expects
Commercial invoiceChinese supplierNames and addresses of seller and buyer, full description, all costs, discounts and commissions; in English or translated; foreign currency converted on a worksheet
Bill of ladingShipping line, released through usIts on-board date sets the exchange rate used for the customs value of containerised goods
Packing listChinese supplierMatches the invoice and the B/L
Freight and insurance statementsCarrier, insurer or sellerShows the costs beyond FOB
Permits or certificatesImporter, from the ministry concernedProduced at entry; the description must match the goods
Certificate of originSupplier or Chinese issuing bodySupports the declared origin
Written clearing instructionImporterOn NamRA's standard form

Examination and release at the gate

When a box is selected for examination, officers check the heading, rate, quantity, origin and value, and look for prohibited goods. Unpacking and repacking costs fall on the importer. For cargo entered for home use, NamRA issues stamped copies of the SAD 500, assessment notice, release order, payment receipt and exit note, so the truck cannot collect until the agent has the release papers in hand.

Customs duty and VAT when shipping from China to Namibia

Duty under the SACU tariff

Duty follows SACU's common external tariff, which South Africa sets in consultation with the other members. The Namibian newspaper reported in February 2026 that NamRA applies the tariff book but does not set the rates, values goods on the free-on-board method and that the rate depends entirely on the HS code. The examples it gave for Chinese goods:

GoodsReported duty
Clothing and footwear20% to 45%, by fabric and product
Plastic sanitary ware (heading 3922)20% to 30%
Motor cars (heading 8703)25%
Off-road logging trucks (heading 8704)10%

Many lines carry lower rates or none. Use NamRA's e-tariff duty estimator, or have your agent run every heading before you set a price.

Import VAT

ChargeRate or basis
Customs dutySACU rate for the HS code, on the FOB value
VAT15% standard rate (some supplies 0% or exempt)
Import VAT baseThe greater of FOB value plus 10%, or market value
Excise and leviesOn specific goods such as fuel and some vehicles
Import VAT accountPayment due by the 20th of the month after import

On a plain FOB invoice, 15% charged on FOB plus 10% equals 16.5% of the invoice value; your agent's ASYCUDA assessment shows the exact base. Duty and VAT in Namibia are paid by the consignee or its clearing agent, not by us.

Typical cargo on this lane

UN Comtrade data published by Trading Economics puts Namibia's imports from China at USD 931 million in 2025. The largest groups were machinery (USD 232 million), electrical and electronic equipment (USD 172 million), vehicles (USD 92 million), iron and steel (USD 56 million) and articles of iron or steel (USD 53 million), followed by aircraft, plastics and rubber.

CargoUsual equipmentWatch for
Machinery and spare parts40ft, flat rack, breakbulkWeights, lifting points, the road route from the port
Electrical goods, cables, solar kits40ft high cubeLithium batteries as DG; separate HS codes for panels, inverters and batteries
VehiclesContainers or ro-ro via a relayThe vehicle duty line and NamRA's rules on vehicle valuation

Restricted and controlled goods in Namibia

  • Goods that need a permit or certificate from another ministry or authority: the document must be produced when the SAD 500 is lodged, and the description must match the goods.
  • Food, plants, animals and animal products: health, phytosanitary or veterinary papers from the Chinese side.
  • Used motor vehicles: NamRA applies its own valuation rules; check the value basis with the agent before you buy.
  • Products under Namibian standards regulations, such as alcohol-based hand sanitisers, which the Namibian Standards Institution must register and approve.
  • Anything on NamRA's prohibited and restricted list, which examiners check at inspection.
Walvis Bay container terminal and harbour cranes — reference-grounded illustration
Walvis Bay container terminal and harbour cranes — reference-grounded illustration. Generated from photographic references; not an event photograph.

Shipping from China to Namibia step by step

  1. Agree FOB with the Chinese supplier, so it files the export declaration and loads at the port.
  2. Decide the final point: a Namibian town or a neighbouring country.
  3. Have the buyer name its clearing agent and sign NamRA's written clearing instruction.
  4. Have the agent confirm HS codes, duty, any permits and how transit will be handled if the goods leave Namibia.
  5. Send us the load port, goods, weight, volume, DG status and target date. We quote the carrier, the loop and the routing.
  6. Once the agent confirms it can clear the cargo, we confirm the booking.
  7. The supplier stuffs the container and files the Chinese export declaration at least 24 hours before loading.
  8. We check the draft B/L against the invoice and packing list and release the carrier's B/L through our Dubai office.
  9. The agent pre-files the SAD 500 once the goods are on board, and we send arrival updates as the ship works down the West African coast.
  10. The consignee pays duty and VAT through the agent, NamRA releases the cargo and the truck collects at the gate.

[AMIR-FACT: one real China to Namibia cross-trade shipment we handled (cargo, load port, carrier and service, Walvis Bay or onward corridor destination, how the clearing agent was lined up, total days), with client approval to mention it]

What drives the cost of shipping from China to Namibia?

We do not publish rates, because each sailing is priced on its own. These are the parts of a landed cost.

Cost blockWhat moves it
Origin charges in ChinaPickup distance, export filing, terminal handling, LCL consolidation
Ocean freightLoad port, direct loop or relay, container type, season, surcharges
Walvis Bay port chargesTerminal handling, LCL unpacking, storage after free time, examination costs
Clearing in NamibiaAgent fee, transit bond or documents for onward cargo
Duty and VATTariff line, FOB value, the 10% VAT uplift
Inland deliveryTruck or rail to Windhoek, the mines or across a border
Delay costsDemurrage and detention when clearance or the empty return runs late

Most avoidable costs arise at the Namibian end. Our article on demurrage and detention explains how free days run out.

Checklist before the supplier ships

  • FOB agreed, and the supplier knows it files the Chinese export declaration.
  • Final destination fixed: Namibia, or onward through a corridor.
  • Clearing agent named, and the written clearing instruction signed.
  • HS codes checked against the SACU tariff or the NamRA estimator.
  • Permits or certificates in hand for controlled goods.
  • Invoice in English with the FOB value shown, packing list and draft B/L all matching.
  • DG papers complete: UN number, class, SDS, Chinese packaging results, DG declaration.

Mistakes to avoid on this lane

MistakeWhat happensHow to avoid it
Shipping before destination clearance is agreedThe box sits at Walvis Bay with no SAD 500 lodged while storage and detention buildName and brief the clearing agent before we confirm space
Expecting a preferential rate for Chinese goodsLanded cost far above budget on clothing, tyres or vehiclesPrice on the general SACU rate
Invoice without a clear FOB valueQueries on the customs value and the VAT baseShow FOB, freight and insurance separately
Permit arranged after arrivalEntry cannot be completed; goods waitGet the permit before production starts
Declaring batteries or chemicals as general cargoRejection by the line or a hold at a port on the loopDeclare DG from the first enquiry
Transit cargo booked as if for NamibiaWrong consignee details and extra paperwork at the portTell us the final country at booking

Frequently asked questions

How long does shipping from China to Namibia take?

Several weeks: Walvis Bay is the last call on Maersk's FEW6 loop, after Singapore and three West African ports. Ask for the vessel's Walvis Bay arrival date, then add cut-off, clearance and delivery time.

Is there a direct service from China to Walvis Bay?

Yes. Maersk's FEW6 calls Qingdao, Shanghai, Ningbo and Nansha, then Walvis Bay without a change of ship. Schedule data also lists direct services from CMA CGM, COSCO, Hapag-Lloyd, OOCL, MSC and ONE.

Does any trade agreement reduce duty on Chinese goods in Namibia?

No. Namibia uses the SACU tariff, and SACU's concluded agreements cover EFTA, the EU, MERCOSUR and the UK with Mozambique, not China. Chinese goods pay the general rate for their HS code.

What VAT applies to imports into Namibia?

VAT is 15%. On imports it is charged on the greater of the FOB value plus 10% or the market value, which on a plain FOB invoice is about 16.5% of the invoice value.

Who clears the cargo at Walvis Bay?

A clearing agent licensed by NamRA, appointed by the consignee with a written clearing instruction. It lodges the SAD 500 on ASYCUDA World and pays duty and VAT. We agree the plan with that agent before booking, but we do not clear goods in Namibia.

Can I ship Chinese goods to Botswana or Zambia through Walvis Bay?

Yes. The Trans-Kalahari and Walvis Bay-Ndola-Lubumbashi corridors start at the port, and the goods move under a NamRA transit procedure. Tell us the final country at booking.

Who issues the bill of lading when I book China to Namibia with you?

The shipping line issues its own B/L. As agent for many lines, we release it to you through our Dubai office. We do not issue a house bill on this lane.

Get a quote for this lane

Send us the Chinese load port, the final town or country, the goods with HS codes, the weight and volume, and whether anything is dangerous. Use our freight rate inquiry form or contact our Dubai office, and our Dubai freight forwarding team will reply with a plan.

Sources

Reviewed: 11 November 2026

Tell us what you are shipping.

Reply within one working day, Monday to Friday, 8:00 to 16:00 Dubai time.