Skip to content

Shipping from Japan to Tanzania: used vehicles, Ro-Ro, containers and TRA customs

Vehicle terminal at Nagoya — reference-grounded illustration
Vehicle terminal at Nagoya — reference-grounded illustration. Generated from photographic references; not an event photograph.

Shipping from Japan to Tanzania is mostly a trade in used cars, trucks and machinery, carried by Ro-Ro car carriers or in containers from ports such as Yokohama, Nagoya and Kobe to Dar es Salaam. Every used vehicle needs a Certificate of Roadworthiness from EAA Company Limited, the inspector the Tanzania Bureau of Standards has contracted for Japan, before it sails. We book the ocean leg from Dubai, release the carrier's bill of lading to you, and line up the Tanzanian clearing agent before any space is confirmed.

Japan to Tanzania shipping at a glance

ItemDetail
Lane typeCross-trade: loads in Japan, discharges in Tanzania, booked and coordinated by Anil Darya in Dubai
Main Japanese load portsYokohama, Nagoya, Osaka and Kobe, which DP World names as Japan's principal outbound container ports
Main Tanzanian portDar es Salaam, which TPA says handles about 95% of Tanzania's international trade
Ways to shipRo-Ro for running vehicles and machinery; FCL or LCL containers for parts, non-runners and general cargo; flat rack or breakbulk for heavy units
Typical long-haul time from Japan25 to 35 days port to port, as DP World describes long-haul sailings from Japan
Japanese export filingExport declaration (form C-5010) by the exporter or a customs broker; vehicles also need a deregistration certificate
Used vehicle checkTBS PVoC: Certificate of Roadworthiness from EAA Company Limited in Japan, valid three months
General goods checkTBS PVoC zone 3 (Far East): SGS, TUV Rheinland Middle East or Intertek
Tanzanian import filingLicensed clearing and forwarding agent, in TANCIS, at least 7 days before arrival
Duty and VATEAC Common External Tariff 0%, 10%, 25% or 35%; VAT 18% Mainland, 15% Zanzibar; excise on used cars by age
Bill of ladingThe shipping line's own B/L, issued and released to you through us as agent for the line

Who does what on a cross-trade booking

The car or container goes straight from a Japanese terminal to Dar es Salaam without touching the UAE, while the booking runs from our Dubai desk. This suits Tanzanian dealers buying at Japanese auctions and Japanese exporters who sell CIF and want one contact for the sea leg.

TaskWho handles it
Space with the carrier, routing and cut-off datesAnil Darya, from Dubai
Buying, deregistration, yard delivery, export declarationThe Japanese seller or its origin agent, on dates we agree with them
Roadworthiness inspection for used vehiclesThe exporter, with EAA Company Limited in Japan
PVoC for parts and general goodsThe exporter, with SGS, TUV Rheinland Middle East or Intertek
Entry in TANCIS and release at Dar es SalaamThe consignee's licensed clearing and forwarding agent
Duty, excise, VAT and leviesThe consignee or its broker

The transport document on this lane is the carrier's bill of lading. We act as agent for many shipping lines, so the line issues its B/L for the Yokohama or Nagoya to Dar es Salaam voyage and we pass it to you, as an original set or an express release, once the freight is paid. For a Ro-Ro unit the B/L should carry the chassis number exactly as it appears on the export certificate and the Certificate of Roadworthiness. We do not issue our own house B/L.

We do not clear goods in Tanzania. The buyer names its clearing agent in Dar es Salaam before we confirm space, and that agent tells us it has the invoice, the chassis or HS details and the roadworthiness certificate it will need. A used truck that lands with nobody ready to lodge the entry sits in the port while storage builds up, so this check comes first, every time.

Ro-Ro or container from Japan?

Most of this lane is vehicles, so the first decision is the ship type.

OptionBest forWatch out for
Ro-Ro car carrierSingle running cars, SUVs, buses, trucks, tractors and wheeled machineryFewer sailings than container loops; loose items in the cabin are usually not accepted; the unit must drive on and off
40ft container, shared or sole useTwo to four cars, non-runners, high-value units, cars plus spare partsLashing and securing; the importer's agent must know every chassis number in the box
20ft or 40ft dryUsed spare parts, tyres for trucks, engines, appliances, general cargoExcise on used goods; used car tyres are prohibited
Flat rack or open topExcavators, cranes, graders and units too wide or tall for a closed boxCarrier approval, lashing plan, TPA out-of-gauge surcharge
BreakbulkVery heavy plant and project piecesVessel date drives the plan; road permits in Tanzania

Höegh Autoliners, one of the Ro-Ro lines, describes in its 2023 annual report a monthly East Asia to Africa trade carrying cargo from Japan, China and Singapore to South and East Africa. That page does not list the African ports, so check that Dar es Salaam is on the voyage you are offered. On any Ro-Ro booking, ask whether the ship calls Dar es Salaam directly or discharges first in another African port. Our flat rack and open top guide explains the out-of-gauge options for machinery that will not drive aboard.

[AMIR-FACT: which Ro-Ro carriers we actually book from Japan to Dar es Salaam, from which Japanese ports, how often they sail, and whether they call Dar es Salaam directly]

Japanese load ports and the Tanzanian side

DP World names Yokohama, Nagoya, Osaka and Kobe as Japan's main outbound container ports and calls Nagoya particularly important for automotive and industrial exports. The seller's yard location decides the port.

Japanese portRegion it draws fromFit for Tanzania cargo
YokohamaGreater Tokyo, Kanto auctionsLarge volume of used cars and containers; the usual first choice for Kanto stock
TokyoTokyo BayContainer cargo; parts and general goods
NagoyaAichi, ChubuVehicles, trucks and industrial goods from the automotive belt
Kobe and OsakaKansaiContainers, machinery and vehicles from western Honshu

In Tanzania, Dar es Salaam takes nearly all of it. TPA describes a quay of about 2,600 metres with deep-water berths, and lists Zambia, DR Congo, Burundi, Rwanda, Malawi, Uganda and Zimbabwe among the inland markets it serves. Tanga in the north and Mtwara in the south are smaller TPA ports; for Japanese cargo, plan on Dar es Salaam and a truck leg unless your carrier confirms another call.

Sea freight from Japan to Tanzania: transit and services

We could not open a carrier schedule page that shows a Japan to Dar es Salaam container rotation with published days, so we print no carrier transit table here. What we can say from sources we opened:

  • DP World describes long-haul sailings from Japan as usually 25 to 35 days port to port.
  • Höegh Autoliners describes its East Asia to Africa Ro-Ro trade as monthly.
  • Container loops from Japan to East Africa often call other Asian ports first, so ask whether the box stays on one ship or changes at a hub.

These are sailing times only. They leave out the wait for a sailing, the inspection slot in Japan, TRA clearance and the leg inland.

[AMIR-FACT: the container lines we actually book from Yokohama, Nagoya and Kobe to Dar es Salaam, direct or via which hub, and the real port-to-port and door-to-door days we see]

FCL and LCL

A 40ft box is the standard way to send several cars, a car plus its spare parts, or a non-runner that cannot drive onto a Ro-Ro ship. For general cargo, LCL suits a few pallets of parts or tools, but every co-loader's papers must be ready before the shared box leaves the CFS in Dar es Salaam. Our FCL vs LCL guide shows where a full box starts to pay, and our sea freight service page lists the container types.

Dangerous goods

Batteries, airbags, fuel left in tanks and paints are the usual DG questions on Japanese vehicle and parts cargo. The IMDG Code 2024 edition (Amendment 42-24) has been mandatory since 1 January 2026, so the shipper's DG declaration must follow it. At Dar es Salaam, TPA wants DG declared by class and adds a 10% handling surcharge. Our dangerous goods team clears the UN number and class with the line before we confirm space.

Heavy machinery and project cargo

Used excavators, cranes and road plant from Japan often go Ro-Ro if they are wheeled or tracked and can be driven or towed aboard. Units that cannot move under their own power go on a flat rack or as breakbulk. Collect weights, dimensions and lifting points from the seller before you ask for a price. Our break bulk and project cargo desk plans stowage with the carrier.

Light truck inspection — generic reference-grounded illustration
Light truck inspection — generic reference-grounded illustration. Generated from photographic references; not an event photograph.

Used vehicles from Japan: the TBS roadworthiness check

Tanzania checks used vehicles before they leave Japan, not after they land. The Tanzania Bureau of Standards guideline for its PVoC programme (the 2025 edition, covering the 2025 to 2028 contract period) says EAA Company Limited is contracted to inspect used motor vehicles from Japan and the United Kingdom. The vehicle gets a Certificate of Roadworthiness (CoR), which TBS treats like a Certificate of Conformity for general goods.

  • A consignment subject to PVoC that arrives without a CoC or CoR will be rejected or fined, the guideline says.
  • The certificate is valid for three months from the date of issue, so inspect close to the sailing, not weeks before.
  • TBS may still reject a vehicle covered by a certificate if it is found non-conforming on checks at the port of entry.
  • The importer submits the original certificate with the B/L, invoice and TRA assessment to TBS through its Online Application System (oas.tbs.go.tz) for authentication, and the clearing agent then uses it to clear the vehicle.

Older guides name other Japanese inspection companies; go by the TBS guideline, which names EAA. An auction sheet does not replace the CoR.

TBS has also published a notice about used spare parts, bicycles, mobile machinery and trailers from Japan. We could not open its text, so we do not state its terms here.

[AMIR-FACT: confirm from the TBS notice on used motor vehicle spare parts, used bicycles, used mobile machinery and used trailers from Japan its date, the inspection body and the start date, before we print it]

Age, excise and steering

The TRA summary "Taxes and duties at a glance 2025/2026" (July 2025) does not set an age ban on used cars. Age raises the tax instead. It lists excise duty on imported used passenger vehicles carrying fewer than 10 persons at 15% for vehicles aged 8 to 10 years and 30% for vehicles over 10 years. Used motorcycles over 3 years old pay 10%, and used four-wheel-drive vehicles for 10 or more persons pay 10% if older than 5 years. Excise on vehicles by engine size is shown as 0% under 1,000 cc, 5% from 1,000 to 2,000 cc and 10% above 2,000 cc.

The same summary bars investment incentive exemptions for a motor vehicle made more than eight years before import. Japanese vehicles are right-hand drive; the TBS and TRA pages we opened say nothing about steering side.

[AMIR-FACT: confirm with a Tanzanian clearing agent or an official TRA or TBS page that no age ban or steering-side rule applies to used vehicles from Japan in 2026]

The Japanese export side: declaration and deregistration

Japan Customs says goods for export must be brought into a Customs (Hozei) area or a specially permitted place. The exporter, or a customs broker acting as its proxy, files the export declaration on form C-5010, and Customs grants the export permit after any examination. Most filings go through NACCS, the electronic system for customs and port procedures, which covers sea cargo from declaration to loading. Under Article 70 of the Customs Law, goods that need a permit under another law are not allowed out until that permit is shown.

Used vehicles add one step. A Japan Customs answer on vehicle exports explains that, under the Road Vehicle Law as amended from 1 January 2005, the owner of a registered vehicle must apply for deregistration and obtain a Certificate of Registration Deletion. For a vehicle already off the register, the owner gets a Certificate of Notice of Planned Export. Customs checks that certificate at the export inspection, and both certificates are valid for six months.

  • The Japanese seller or its agent files the export declaration. A Tanzanian buyer cannot.
  • Under EXW, someone in Japan must still act as exporter. FOB or CIF closes that gap, and most vehicle sellers quote CIF Dar es Salaam. Our Incoterms 2020 guide explains where cost and risk pass.
  • Chassis number, model year and engine size must match across the export certificate, the CoR, the invoice and the B/L.
  • Machinery and some technical goods can fall under METI export control. The seller should confirm this before you pay.

TBS PVoC for parts and general goods from Japan

Goods other than used vehicles follow the general PVoC route. Japan sits in TBS zone 3, Far East, with South Korea, Indonesia, Malaysia, the Philippines, Thailand, Singapore, Vietnam and Cambodia. Three inspectors cover that zone:

Zone 3 inspectorFee on declared FOB value (TBS schedule)
SGS Societe Generale de SurveillanceRoute A 0.50%, Route B 0.45%, Route C 0.25%
TUV Rheinland Middle East FZESame routes and rates
Intertek InternationalSame routes and rates

Each route has a minimum fee of USD 250 and a maximum of USD 5,000. Route A means inspection and testing of each shipment, Route B is for registered products shipped often, and Route C is for licensed manufacturers. For high-risk products, the inspector watches loading and seals the container. Intertek states that regulated general goods arriving without a CoC face a penalty of 15% of CIF value plus destination inspection. Food must arrive with at least 75% of its shelf life left, or 12 months where total shelf life is over 18 months, and other goods with at least 50%, according to TBS's August 2026 procedure.

Tanzanian customs, duty and taxes on Japanese goods

Entry and documents

TRA clears imports under the East African Community Customs Management Act 2004. The importer appoints a licensed clearing and forwarding agent, who lodges the entry in TANCIS. TRA asks for lodgement at least 7 days before the ship arrives, and incomplete declarations are rejected by the system.

DocumentComes fromCheck
Commercial invoiceJapanese sellerChassis or HS details, Incoterm, value
Packing listJapanese sellerUnits, weights and any loose parts
Bill of ladingThe carrier, released through usConsignee and notify party are the importer and its agent
Certificate of RoadworthinessEAA in JapanSame chassis number; issued within three months
Certificate of ConformityZone 3 inspectorFor regulated parts and general goods
Export or deregistration certificateSeller, from the Japanese transport officeVehicle data match the invoice
Agent authorisation and any permitsImporterSigned and issued before shipment

What the consignee pays

There is no trade agreement between Japan and Tanzania that lowers duty. TRA's summary gives the zero rate only to goods made in EAC or SADC member states that meet the rules of origin, so Japanese goods pay the full Common External Tariff:

ChargeRate (TRA 2025/2026)
Raw materials, pharmaceuticals, capital goods, farm implements0%
Semi-finished goods10%
Finished consumer and commercial goods25%
Fully finished or special items35%
Excise on used spare parts and used domestic or electric appliances25%
Excise on used passenger cars by age15% at 8 to 10 years, 30% over 10 years
Railway Development Levy, Mainland home use2% of CIF
Customs Processing Fee0.6% of FOB
Import VAT18% Mainland, 15% Zanzibar

TPA's January 2026 tariff also adds a Green Port Initiatives charge of USD 1.00 per cubic metre on motor vehicles. Duty and taxes at destination are paid by the consignee or its broker. Ask the agent for a written estimate on the exact model, year and engine size before you bid at auction, because the tax on an older 2.5-litre SUV can outweigh the freight.

Vehicle yard at Dar es Salaam — reference-grounded illustration
Vehicle yard at Dar es Salaam — reference-grounded illustration. Generated from photographic references; not an event photograph.

Typical Japanese cargo and the first check for each

CargoUsual modeCheck first
Used cars and SUVsRo-Ro, or 40ft for several unitsEAA CoR, deregistration certificate, excise by age
Used trucks, buses and tractorsRo-RoCoR, body condition, axle loads for the drive inland
Excavators, cranes, road plantRo-Ro, flat rack or breakbulkDimensions, weight, current TBS rule for used machinery
Used spare parts and engines20ft or 40ft dry25% excise, fluids drained, current TBS rule for parts
New machinery and equipment40ft or flat rackPVoC; 0% band if it qualifies as a capital good
Tyres20ft or 40ftUsed tyres for cars and light commercial vehicles are prohibited
Appliances and electronics40ft dryPVoC; 25% excise if used

Prohibited and restricted goods in Tanzania

TRA lists narcotic drugs, tear gas, seditious or obscene material and used tyres for light commercial vehicles and passenger cars as prohibited. That matters here, as loose tyres often travel with used cars. Live animals, plants, firearms, ammunition and ivory are restricted and need a permit from the authority concerned. TASAC holds sole clearance rights for some goods, including arms and ammunition, mineral concentrates and chemicals used by mining companies, so keep those on their own bill of lading.

Vehicles and cargo for Zambia, Malawi, DR Congo and other inland buyers

A large share of Japanese vehicles landed at Dar es Salaam is bound for neighbouring countries. For Rwanda, Burundi and Uganda, TRA says goods under the EAC Single Customs Territory are declared once, in the destination country. Cargo for Zambia, Malawi, DR Congo and Zimbabwe moves under a Tanzanian transit declaration. TPA's tariff gives transit imports 15 free storage days against 5 for domestic imports. Show the final country and consignee on the B/L from the start, since changing them after arrival costs time and fees.

When routing through Dubai makes sense

For one Ro-Ro car to one buyer, sail direct. Dubai helps in a few cases, each with its own paperwork.

OptionWhen it fitsWhat changes
Hold Japanese vehicles or parts in JAFZA, sell laterYou supply several East African buyers from one stockGoods sit in a bonded zone and leave under a re-export declaration
Consolidate in DubaiJapanese parts plus goods from the UAE or other origins for one buyerOne container from Jebel Ali instead of several LCL lots
Container transhipment at Jebel AliThe carrier's own routing calls Jebel AliLonger transit; ask for the full routing in writing

The inspector changes with the export country. The TBS guideline says Quality Inspection Services Inc. Japan (QISJ) holds the contract for used vehicles in Dubai, so a Japanese car re-exported from Dubai is inspected there, not by EAA in Japan. General goods sold from Dubai stock fall in TBS zone 12, the UAE, covered by SGS, TUV Rheinland Middle East and Intertek. Where cargo is consolidated, cleared or re-exported in Dubai, the Dubai customs clearance is our work, for a fee, and Dubai Chambers issues certificates of origin for re-exported goods. See our Jebel Ali port guide and our article on re-exporting through JAFZA.

[AMIR-FACT: whether we have moved Japanese vehicles or parts for Tanzania through Dubai (JAFZA stock, consolidation or Jebel Ali transhipment), and how the QISJ inspection was handled]

How to book the lane, step by step

  1. Send us the details: what you are shipping, chassis numbers or HS codes, sizes and weights, Japanese yard or port, ready date and Incoterm.
  2. Name the Tanzanian clearing agent. We confirm with that agent that it will clear this shipment and has what it needs. Nothing is booked before this.
  3. The agent estimates duty, excise and VAT on the exact unit, so the buyer knows the landed cost.
  4. We quote the options: Ro-Ro, container or flat rack, with sailing dates and load port.
  5. The seller deregisters the vehicle and gets the Certificate of Registration Deletion or the Notice of Planned Export.
  6. The seller books the EAA roadworthiness inspection, or a zone 3 PVoC inspection for general goods, timed so the certificate is still valid on arrival.
  7. We secure space. DG, machinery and out-of-gauge units get carrier approval first.
  8. The seller or its origin agent delivers to the port or yard and files the export declaration before cut-off.
  9. We check the draft B/L against the invoice, the export certificate and the CoR, chassis number by chassis number.
  10. The carrier issues its B/L and we release it to you.
  11. The agent lodges in TANCIS at least 7 days before arrival and authenticates the certificate with TBS.
  12. The consignee or its broker pays the duty and taxes and collects within the free days. For containers, the empty goes back on time; our note on demurrage and detention explains why.

[AMIR-FACT: one real Japan to Tanzania cross-trade shipment we coordinated (vehicle or cargo, Japanese port, Ro-Ro or container, carrier, how the CoR and the Tanzanian agent were lined up, transit achieved), with client approval]

What decides the cost of shipping from Japan to Tanzania?

We do not publish rates, since they change each sailing. These are the parts of the bill.

Cost partWhat moves it
Japan sideAuction or yard to port transport, deregistration, export declaration by the broker
InspectionEAA roadworthiness fee per vehicle; zone 3 PVoC fee on FOB value for other goods
Ocean freightRo-Ro units are charged on size; containers on box type, routing and season
Dar es Salaam chargesTerminal handling, vehicle handling, Green Port charge, line local charges
StorageDays past TPA free time; DG and out-of-gauge surcharges
Duty and taxesCET band, excise by age and engine size, VAT, RDL, processing fee
Inland legDriving or trucking distance, transit bonds for neighbouring countries

Most avoidable costs are paperwork gaps: an expired CoR, a wrong chassis number on the B/L, a late TANCIS lodgement.

Checklist before the vehicle or box leaves Japan

  • Tanzanian clearing agent appointed and confirmed in writing.
  • Landed tax estimated on the exact model, year and engine size.
  • Deregistration certificate issued and within its six-month validity.
  • EAA Certificate of Roadworthiness issued and still valid on arrival.
  • PVoC certificate from a zone 3 inspector for regulated parts and goods.
  • Chassis numbers identical on invoice, export certificate, CoR and draft B/L.
  • No used car or light truck tyres packed with the cargo.
  • Batteries, fuel and DG items declared under IMDG 42-24.
  • Final destination shown for transit cargo.

Mistakes we see on this lane

  • Shipping before destination clearance is agreed. Without an agent ready to lodge, storage starts the day the ship berths.
  • Using an inspection company from an old guide instead of the one TBS names for Japan.
  • Inspecting a car months early, so the three-month certificate expires before the ship arrives.
  • Buying an older vehicle without pricing the age-based excise.
  • Stuffing used car tyres or loose parts into a Ro-Ro unit's cabin.
  • Typing one wrong digit of the chassis number on the B/L.

Frequently asked questions

How long does shipping from Japan to Tanzania take?

DP World describes long-haul sailings from Japan as usually 25 to 35 days port to port. Add the inspection, the wait for the next sailing and clearance at Dar es Salaam for the full door-to-door time.

Is Ro-Ro or a container better for a car from Japan?

Ro-Ro is usually the simpler choice for a single running vehicle. A 40ft container suits several cars, non-runners, high-value units or a car shipped with its spare parts.

Who inspects used vehicles from Japan for Tanzania?

EAA Company Limited, under contract to the Tanzania Bureau of Standards. It issues a Certificate of Roadworthiness, valid for three months, which must accompany the vehicle.

Is there an age limit on used cars imported into Tanzania?

The TRA 2025/2026 summary sets no age ban. It charges excise on used passenger cars of 15% at 8 to 10 years and 30% over 10 years, so check the current rule with your clearing agent.

What duty and VAT apply to Japanese goods in Tanzania?

The EAC Common External Tariff applies at 0%, 10%, 25% or 35%, plus excise on listed goods, the 2% Railway Development Levy, the 0.6% Customs Processing Fee and 18% VAT on the Mainland.

What does the Japanese seller need for export?

An export declaration on form C-5010 through a customs broker, and for a vehicle, the Certificate of Registration Deletion or Notice of Planned Export, which Japan Customs checks at export.

Does Anil Darya clear the cargo in Dar es Salaam?

No. Clearance in Tanzania is done by the buyer's own licensed agent through TANCIS, and duty and taxes at destination are paid by the consignee or its broker. We check that agent is lined up before the booking is confirmed.

Who issues the bill of lading for a Japan to Dar es Salaam booking?

The carrier issues its own B/L. As agent for many shipping lines, we release that carrier document to you from Dubai once the freight is paid.

Get a Japan to Tanzania shipping quote

Send us the vehicle or cargo details, the Japanese yard or port, the ready date and your Tanzanian clearing agent through our freight rate inquiry form, and we will come back with sailings and a price. For machinery, DG or several units, talk to our team first. You can also read about our Dubai freight forwarding team.

Sources

Reviewed: 11 November 2026

Tell us what you are shipping.

Reply within one working day, Monday to Friday, 8:00 to 16:00 Dubai time.